Humor

Aluminium Profile Extrusion
https://www.sibaicnc.com/aluminium-profile-extrusion/


Aluminium Profile Extrusion
As an industrial material produced by extrusion process, aluminum profiles will have some difficulties in designing and opening molds, which will be a great challenge for factory's craftsmanship.

Difficulties In Designing And Opening Stock Aluminum Extrusion Profiles
aluminum extrusion machining
The first difficulty lies in the tolerance.

The higher the dimensional tolerance requirements, the higher the difficulty. For example, the normal international standard, the high-precision 0.2 tolerance, if the tolerance is increased to 0.1 mm, then the difficulty is even more than doubled.

The second difficulty lies in the cavity.

The more the cavity of the profile, the denser and smaller. Then the punch of the die is more likely to be broken during extrusion. A few profiles have not been made, and the mold is broken. The complex and multi-cavity mold reflects the strength level of the factory. Not necessarily a large mold, the production difficulty is large. There are some large molds with a weight of 5-6 tons, but the difficulty is not high, but it requires a large-tonnage extruder. If the die-casting plant is not equipped with the corresponding machine, it cannot work out the big profile. This is not related to the complexity of the mold.