Architektura

https://www.ericwchem.com/products/byk-024-defoamer-cas-no-56346-34634634.html
Silicone defoamer, voc-free, used in water-based latex paints, printing inks, varnishes and emulsion adhesives. Good compatibility, multi-purpose and easy addition.

Product Information of BYK 024 CAS No. 56346-34634634

Chemical composition

Mixture of bubble breaking polysiloxane and hydrophobic particles in polyethylene glycol without containing voc (< 1500ppm)
Typical materialized data
The data given on this data page are only typical values, not technical indicators of the product. Density (20 ° c.): 1.01 g/ml

Current status of food contact regulations
For information on the food contact regulatory status of this product, please contact our product safety department or visit www.byk.com.

Storage and transportation
Delamination May occur with this product. Please stir well before use.

Areas of Application of BYK 024 CAS No. 56346-34634634

Printing inks and varnishes
Product features and advantages

BYK-024 is recommended as an antifoaming agent for water-based printing inks and varnishes of acrylate/polyurethane and polyurethane, and can also in water-based UV systems.

Suggested dosage
0.1-1% adjuvant dosage (purchased form) is based on the total formulation.

The above recommended addition amount is for reference only, and the optimal addition amount needs to be determined through a series of experiments.

Addition method and processing guidance
The auxiliary agent can be added at any stage of production. The dosage of defoaming agent can be divided into two additions (2/3 of the dosage is added to the abrasive, and 1/3 of the dosage is added during the paint mixing stage or after completion).

Coatings industry
Product features and advantages
BYK-024 is recommended as an antifoaming agent for high gloss emulsion systems of acrylate/polyurethane and polyurethane with pigment volume concentrations in the range of 0-25. The additive can be effectively used in various standard construction methods, such as roll coating, brush coating, spray coating and pouring.

Suggested dosage
0.1-1% adjuvant dosage (purchased form) is based on the total formulation.

The above recommended addition amount is for reference only, and the optimal addition amount needs to be determined through a series of experiments.

Addition method and processing guidance
The auxiliary agent can be added at any stage of production. The dosage of defoaming agent can be divided into two additions (2/3 of the dosage is added to the abrasive, and 1/3 of the dosage is added during the paint mixing stage or after completion).

Adhesive
Product features and advantages
BYK-024 is recommended as a defoaming agent for defoaming water-based emulsion adhesives.

Suggested dosage
0.05-1% adjuvant dosage (purchased form) is based on the total formulation.

The above recommended addition amount is for reference only, and the optimal addition amount needs to be determined through a series of experiments.

Addition method and processing guidance

The auxiliary agent can be added at any stage of production.

Glass Fiber Wetting Agent

Product features and advantages
BYK-024 is recommended for defoaming of water-based fiberglass wetters.

Suggested dosage
0.1-0.3% adjuvant dosage (purchased form) is based on the total formulation.

The above recommended addition amount is for reference only, and the optimal addition amount needs to be determined through a series of experiments.

Addition method and processing guidance
The auxiliary agent can be added at any stage of production under stirring conditions.