Design

Keying Paint Striper Disc With Shank
For coarse cleaning work such as removing paint, scale, heat discoloration, rust, and adhesive residues in peripheral grinding. Open-cell material prevents loading and gives cool grinding properties.

Paint Striper Disc with Shank Materials that can be Worked:
Advantages
Low clogging
Excellent performance and lifetime
Hard-wearing, low grinding noise.
Fast to remove the paint or rust without damaging the original surface.
Durable in use.
Uniform grinding force
More sharp than Black

Features of Paint Striper Disc with Shank
Grinding disc removes rust, scale, and old paint from metal
Multi-use abrasive works on metal, wood, fiberboard and plastics
Flexible non-woven nylon fiber disc will not rust or splinter
Coarse silicon carbide abrasive cuts fast to save time

Paint Striper Disc With Shank Applicable Industries
Applications
Removal of rust, corrosion stains, scale, dirt, paints.
Cleaning of weld seams
Removal of slight drawing marks and heat discolorations
Cleaning of surfaces of diverse characteristics
Clean Stainless steel surface in preparation of adhesive bonding or application of fillers.

Paint Striper Disc With Shank Applicable Industries
Recommendations for Use:
Preferably for use on slow-running angle grinders.

For the best results, use at a recommended cutting speed of 30–35 m/s.

Paint Striper Disc With Shank Applicable Industries
Matching Tool Drives:
Flexible shaft drive
Power drill
Straight grinder

Paint Striper Disc With Shank Applicable Industries
Safety Instructions of Paint Striper Disc With Shank

How To Paint Striper Disc With Shank
Instructions:
Safety Instructions of Paint Striper Disc With Shank

Please try to choose to operate indoors environment and wear protective guards and goggles.

Never exceed the recommended maximum permitted rotational speed for safety reasons.

In order to have a good stock removal rate, quality of surface, and thermal loading on the workpiece, the best performance would be with a recommended cutting speed at 15-20m/s.

Don't push and increase the pressure during the processing to achieve a finner surface looking, but try to switch to different grit flap wheels.

Safety Warning:
The clamping length between shank and grinders should be more than 15mm.
Never exceed the maximum safe speed when the shank is extra long. Try to consult your sales to check the safety rotating speed before use.

For more information about flap wheel and paint stripping disc for wood, please feel free to contact us!

If you are looking for a reliable abrasives factory, please contact us.
https://www.keyingabrasives.com/products/keying-paint-striper-disc-with-shank/