Design

Keying Quick Change Paint Striper
The non-woven cleaning material is glued onto a glass-fabric base. This makes KEYING Strip Discs suitable for use in face-down grinding. For coarse cleaning work such as removing paint, scale, heat discoloration, rust, and adhesive residues.

Features of Keying Quick Change Paint Striper
Grinding disc removes rust, scale, and old paint from metal

Multi-use abrasive works on metal, wood, fiberboard, and plastics

Flexible non-woven nylon fiber disc will not rust or splinter

Coarse silicon carbide abrasive cuts fast to save time



Keying Quick Change Paint Striper Materials that can be Worked:
Advantages
Low clogging
Excellent performance and lifetime

Keying Quick Change Paint Striper Applicable Industries
Applications
Removal of rust, corrosion stains, scale, dirt, and paints.
Cleaning of weld seams
Removal of slight drawing marks and heat discolorations
Cleaning of surfaces of diverse characteristics
Clean Stainless steel surface in preparation of adhesive bonding or application of fillers.

Recommendations for Use:
Preferably for use on slow-running angle grinders.
For the best results, use at a recommended cutting speed of 30–35 m/s.

Matching Tool Drives:
Flexible shaft drive
Power drill
Straight grinder

Why is black cheaper?
Because the commonly used material is black, blue and purple are more wear-resistant, and the material cost is different.

Safety Instructions of Keying Quick Change Paint Striper
Instructions:
Safety Instructions of Keying Quick Change Paint Striper


1. Please try to choose an operation indoor environment and wear protective guards and goggles.

2. Never exceed the recommended maximum permitted rotational speed for safety reasons.

3. In order to have a good stock removal rate, quality of surface, and thermal loading on the workpiece, the best performance would be with a recommended cutting speed of 15-20m/s.

4. Don't push and increase the pressure during the processing to achieve a finner surface looking, but try to switch to different grit flap wheels.

Safety Warning:
The clamping length between shank and grinders should be more than 15mm.

Never exceed the maximum safe speed when the shank is extra long. Try to consult your sales to check the safety rotating speed before use.

As a abrasives supplier, we provide angle grinder to remove paint from metal, remove paint from metal with grinder, bench grinder flap wheel, etc. For more information, please feel free to contact us!
https://www.keyingabrasives.com/products/keying-quick-change-paint-striper/